| No. | Condition Text |
|---|
| 1. | The development must be begun not later than three years beginning with the date of this permission.
The reason for the condition is :-
The time limit condition is imposed in order to comply with the requirements of Section 91 of the Town and Country Planning Act 1990 as amended by Section 51 of the Planning and Compulsory Purchase Act 2004. |
| 2. | The development hereby permitted shall be carried out in accordance with the amended car parking plans (ref: SP/P/01A and dated Nov.08) submitted on 14 April 2009. All other development hereby permitted shall be carried out in accordance with plans numbered E/P/01, E/E/01, P/P/01, P/P/02, P/P/03, P/P/04, and P/P05, and all other details as submitted on 13 March 2009 forming the planning application.
The reason for the condition is :-
For the avoidance of doubt. |
| 3. | All existing ornamental features including any chimney pieces, pasterwork, architraves, skirting, panelling, doors, staircases, balustrading and other original features shall remain undisturbed in their existing position and shall be fully protected during the course of the work on site, unless specifically authorised otherwise on the drawings hereby approved or subsequently in writing by the local planning authority prior to any commencement of works on site.
The reason for the condition is :-
To ensure the protection of the special architectural and historic interest of the building. |
| 4. | No development shall take place until a detailed scheme of works for all external repairs and making good has been submitted to and approved in writing by the local planning authority. The development shall be carried out in accordance with the details as approved.
The reason for the condition is :-
To ensure the protection of the special architectural and historic interest of the building. |
| 5. | No development shall take place on the site until all details of internal and external joinery have been submitted to and approved in writing by the local planning authority. Such details shall include drawings of no less than 1:20 scale and shall be carried out with the details as approved.
The reason for the condition is :-
To enable the local planning authority to ensure the satisfactory appearacne of the development. |
| 6. | No development shall take place until detailed drawings and written specifications of the roof lights have been submitted to and approved in writing by the local planning authority.
The reason for the condition is :-
To ensure the proptection of the sepcial architectural and historic interest of the building. |
| 7. | No development shall take place until there has been submitted to and approved in writing by the local planning authority a plan indicating the positions, design, materials and boundary treatment to be erected. The boundary treatment shall be completed before the building is first occupied. The development shall be carried out in acordance with the approved details.
The reason for the condition is :-
In the interests of the satisfactory appearance of the development and the wider Conservation Area. |
| 8. | No development shall take place until details of both hard and soft landscape works have been submnitted to and approved in writing by the local planning authority. There works shall be carried out as approved.
These details shall include:
-proposed finished levels or contours
-hard surfacing materials
-pedestrian access and circulation areas
-minor artefacts and structures (lighting, signs etc)
-proposed and existing functional services above and below ground (eg drainage,power, communicationn cables etc.)
-retained historical landscape features and proposals for restoration,where relevant.
Soft landscaping works shall include:
-planting plans
-wirtten specifications
-schedules of plants, noting species, plant sizes and proposed densities/numbers where appropriate
-implementation programme
If within a period of FIVE YEARS from the date of planting, any tree or plant or any tree or plant planted in replacement for it is removed, uprooted or is destroyed or dies (or becomes in the opinion of the local planning authority, seriously defective or damaged)another tree or plant of the same species and size as that originally planted shall be planted at the same place unless the local planning authority gives ts written consent to any variation.
The reason for the condition is :-
In the interests of the satisfactory appearance of the development. |
| 9. | No development shall take place on the Town Wall until the applicant has appointed a person approved by the local planning authority to supervise works, and no work shall be carried out except under the supervision of that person, or any other person appointed with the local planning authority's approval.
The reason for the condition is :-
To ensure the architectural and historic interest of the Scheduled Ancient Monument. |
| 10. | REASON FOR APPROVAL OF THE APPLICATION :-
The proposal meets the provisions of the Great Yarmouth Borough Wide Local Plan and, in particular, policies HOU7, HOU15, HOU19 and HOU23. |
| 11. | The applicants attention is drawn to the rollowing recommendations from Norfolk Constabulary:
The main front door set to the house should meet BSI Pas 24-1 specification;
It should be fitted with a multi point deadlocking system with three or more deadbolts/hook bolts, or by a combination thereof. External entry must be latch withdrawal by use of the key, not by lever. The standard for all lock cylinders is BS EN 1303 Grade 3.
OR
An automatic deadlocking rim lock fitted one third from the top of the door, with a mortice deadlock and boxed keep Kitemarked to BS 3621:1998 one third from the bottom of the door;
Casual public access to the multiple occupancy part of the building should be discouraged by an access control system such as Proximity Access Control or a video door entry system or a combination of both. All glazing in and adjacent to external doors should be laminated glass to a minimum of 6.4mm thickness and securely fixed in accordacne with GGF Guidelines;
Door frames should be securely fixed to the structure of the building at maximum 600mm centres and 200mm from each corner;
All lower ground floor and ground floor windows and those easily accessible above ground floor should meet BS 7950 sepcifications and should have key operated locks;
External lighting should be designed to cover all external doors and other vulnerable areas such as passage ways and service areas and car parks, controlled by photo electric cell and the use of low consumption lamps is recommended with the units positioned to reduce glare and light pollution;
Bins should be situated away from the building and secured;
Apartment front doors should be of solid wooden construction fitted with door viewers and door chains; and
Internal lighting in communal areas should consist of low evergy fittings and be controlled using photo electric switches to ensure that stairs and landings are well lit to help reduce fear of crime. |